Apollo 77-140 Series Bronze Ball Valve with Stainless Steel 316 Ball and Stem, with Mounting Pad, Two Piece, Inline, Lever, 2" NPT Female

Apollo 77-140 Series Bronze Ball Valve with Stainless Steel 316 Ball and Stem, with Mounting Pad, Two Piece, Inline, Lever, 2" NPT Female Review

Apollo 77-140 Series Bronze Ball Valve with Stainless Steel 316 Ball and Stem, with Mounting Pad, Two Piece, Inline, Lever, 2" NPT Female Feature

• Made of bronze for higher strength and corrosion resistance than brass
• Zinc-plated steel lever handle with vinyl sleeve for manual on/off control
• Actuator mounting pad for automated operation
• Stainless steel 316 ball and stem for resistance to corrosion
• Female National Pipe Taper (NPT) threads for connecting to male threaded pipes

The Apollo 77-140 series bronze two-piece inline ball valve has a lever handle, an actuator mounting pad, and female National Pipe Taper (NPT) threads on both ends. The body of this valve is made of bronze for higher strength and corrosion resistance than brass, and the ball and stem are made of stainless steel 316 for greater corrosion resistance than standard steel. It has a zinc-plated steel lever handle with a vinyl sleeve for manual on/off control. This valve has a mounting pad for attaching a quarter-turn electric or pneumatic actuator to provide automated operation, and it has NPT threads for creating tighter seals than straight threads. Reinforced polytetrafluoroethylene (RPTFE) seats and multifill polytetrafluoroethylene (MPTFE) stem packing reduce the possibility of leakage. The valve is full port for reduced friction; its inner diameter is the same as the inner diameter of the pipe it connects to for maximum operating efficiency. The maximum pressure is 600 pounds per square inch (gauge) (psig) for use with water, oil, and gas (WOG) and 150 psig for saturated steam, and the temperature range is -20 to 450 degrees Fahrenheit. This ball valve is for use in water lines, processing plants, and agricultural applications and meets standard MSS SP-110 for quality assurance.

Ball valves use a spherical disc to control the flow between pipes, tubes, or hoses. Flow is allowed when the hole that pierces the ball-shaped disc is in line with the inlet and outlet of the valve. Flow is blocked when the ball is horizontally swiveled 90 degrees, so that the hole of the ball is perpendicular to the opening of the valve. Ball valves can be referred to as full port or reduced port (also known as regular or standard port) depending on the inner diameter of the valve. A ball valve is full port if the hole of the ball is the same size as the inner diameter of the connecting pipeline (resulting in lower friction) and is reduced port if the hole of the valve is one pipe size smaller than the pipe, resulting in less flow through the valve than through the shaft of the pipe. Ball valves may have a handle or lever that aligns with the ball’s position (open or closed) for manual operation. They are primarily used in air, gas, liquid, and steam applications.

Apollo manufactures ball, mixing, and relief valves, actuators, water gauges, marine fittings, heating and plumbing products, and backflow prevention devices. The company, founded in 1928 and headquartered in Matthews, NC, meets International Organization for Standardization ISO/IEC 17025:2005 and makes products that meet ISO and American National Standards Institute (ANSI) standards.