LDR 020 7534 3/4-Inch Ball Hose Bibb Valve, Brass

LDR 020 7534 3/4-Inch Ball Hose Bibb Valve, Brass Review

LDR 020 7534 3/4-Inch Ball Hose Bibb Valve, Brass Feature

• 3/4-Inch IPS Brass
• Quarter turn
• No kink
• 100 percent Pressure tested at factory
• CSA Approved

BALL VALVE TYPE HOSE BIBBS-MALE -

Apollo 76-600 Stainless Steel Ball Valve, Two Piece, 3-Port Diverting, Lever, 1/2" NPT Female

Apollo 76-600 Stainless Steel Ball Valve, Two Piece, 3-Port Diverting, Lever, 1/2" NPT Female Review

Apollo 76-600 Stainless Steel Ball Valve, Two Piece, 3-Port Diverting, Lever, 1/2" NPT Female Feature

• Made of stainless steel for resistance to corrosion
• Stainless steel lever handle with a vinyl sleeve for manual control
• Three-port diverting valve to regulate flow among three sections of pipe
• Pounds per square inch (gauge) (psig) rating of 800 for water, oil, and gas (WOG)
• Female National Pipe Taper (NPT) threads for use with male threaded pipes

The Apollo 76-600 series two-piece three-port diverting ball valve is made of stainless steel and has a lever handle and female National Pipe Taper (NPT) threaded connections on both ends. This valve is made of stainless steel for resistance to corrosion and has a stainless steel lever handle with a vinyl sleeve for manual control. The valve is three-port diverting to regulate flow among three sections of pipe. The maximum pressure is 800 pounds per square inch (gauge) (psig) for water, oil, and gas (WOG) and the valve has NPT threads on both ends for creating tighter seals than straight threads. Reinforced polytetrafluoroethylene (RPTFE) seats and multifill polytetrafluoroethylene (MPTFE) stem packing reduce the risk of valve leakage and this ball valve is standard (or regular) port for reduced valve size and cost. For use with water lines, processing plants, and agricultural applications, this valve meets standard NACE MR-01-75 for quality assurance in use in oil and gas applications.

Ball valves use a spherical disc to control the flow between pipes, tubes, or hoses. Flow is allowed when the hole that pierces the ball-shaped disc is in line with the inlet and outlet of the valve. Flow is blocked when the ball is horizontally swiveled 90 degrees, so that the hole of the ball is perpendicular to the opening of the valve. Ball valves can be referred to as full port or reduced port (also known as regular or standard port) depending on the inner diameter of the valve. A ball valve is full port if the hole of the ball is the same size as the inner diameter of the connecting pipeline (resulting in lower friction) and is reduced port if the hole of the valve is one pipe size smaller than the pipe, resulting in less flow through the valve than through the shaft of the pipe. Ball valves may have a handle or lever that aligns with the ball’s position (open or closed) for manual operation. They are primarily used in air, gas, liquid, and steam applications.

Apollo manufactures ball, mixing, and relief valves, actuators, water gauges, marine fittings, heating and plumbing products, and backflow prevention devices. The company, founded in 1928 and headquartered in Matthews, NC, meets International Organization for Standardization ISO/IEC 17025:2005 and makes products that meet ISO and American National Standards Institute (ANSI) standards.

Ball Drip Valve-1/2"x1/2" $8.28 ea for 10 or More

Ball Drip Valve-1/2"x1/2" .28 ea for 10 or More Review

Ball Drip Valve-1/2"x1/2" .28 ea for 10 or More Feature

• Buy 10 or more get 40% off (.28 ea). Buy 150 or more get 50% off (.90 ea).
• Automatic Ball Drip Valve 1/2"x1/2" . Used to drain low point of system between check valve & Fire Department connection
• Automatically seals under pressure. Must be installed in horizontal position.
• Standard Cast Brass Straight Connection NPT Both Sides
• Used to drain low point of system between check valve & Fire Department connection

1/2"x1/2" Ball Drip Valve. Used to drain low point of system between check valve & Fire Department connection. Automatically seals under pressure.

Homewerks VBV-FSW-B5B Full Port Ball Valve with Drain, Female Thread x Female Thread, Brass, 1-Inch

Homewerks VBV-FSW-B5B Full Port Ball Valve with Drain, Female Thread x Female Thread, Brass, 1-Inch Review

Homewerks VBV-FSW-B5B Full Port Ball Valve with Drain, Female Thread x Female Thread, Brass, 1-Inch Feature

• Full Port
• 500 PSI non-shock WOG
• Forged brass body with Teflon seats
• Drain waste and cap
• Meets ANSI / NSF 61 low lead requirements

Homewerks VBV-FSW-B5B Full Port Ball Valve with Drain, Female Thread x Female Thread, Brass, 1-Inch.Full Port500 PSI non-shock WOGForged brass body with Teflon seatsDrain waste and capMeets ANSI / NSF 61 low lead requirements

King Brothers Inc. BTU-0750-E 3/4-Inch Slip and Threaded PVC Heavy Duty True Union Ball Valve, Gray

King Brothers Inc. BTU-0750-E 3/4-Inch Slip and Threaded PVC Heavy Duty True Union Ball Valve, Gray Review

King Brothers Inc. BTU-0750-E 3/4-Inch Slip and Threaded PVC Heavy Duty True Union Ball Valve, Gray Feature

• Made in the USA with quality PolyOne Schedule 80 PVC II material
• NSF certified to be drinking water safe and low lead approved
• UPC/IAPMO listed
• Pressure rated to 235 psi at 73F Degree
• Details and certifications available www.kbico.com

KBI | King Brothers Inc.

LDR 020 7533 1/2-Inch Ball Hose Bibb Valve, Brass

LDR 020 7533 1/2-Inch Ball Hose Bibb Valve, Brass Review

LDR 020 7533 1/2-Inch Ball Hose Bibb Valve, Brass Feature

• 1/2-Inch IPS Brass
• Quarter turn
• 100 percent Pressure tested at factory
• CSA Approved

BALL VALVE TYPE HOSE BIBBS-MALE -

King Brothers Inc. EBV-0750-T 3/4-Inch Threaded PVC Schedule 40 Economy Ball Valve, White

King Brothers Inc. EBV-0750-T 3/4-Inch Threaded PVC Schedule 40 Economy Ball Valve, White Review

King Brothers Inc. EBV-0750-T 3/4-Inch Threaded PVC Schedule 40 Economy Ball Valve, White Feature

• Made in the USA with High Quality ProGuard PVC II material
• NSF certified to be drinking water safe and low lead approved
• UPC/IAPMO listed
• Pressure rated to 150 psi at 73F Degree
• Details and certifications available www.kbico.com

PVC construction. 150 PSI rated at 730. (Not for use with compressed air). Solid Teflon seats. Large flow opening. White color.

King Brothers Inc. LT-2000-S 2-Inch Slip PVC Schedule 80 Commercial Ball Valve, Gray

King Brothers Inc. LT-2000-S 2-Inch Slip PVC Schedule 80 Commercial Ball Valve, Gray Review

King Brothers Inc. LT-2000-S 2-Inch Slip PVC Schedule 80 Commercial Ball Valve, Gray Feature

• Made in the USA with quality PolyOne Schedule 80 PVC II material
• NSF certified to be drinking water safe and low lead approved
• UPC/IAPMO listed
• Pressure rated to 150 psi at 73F Degree
• Details and certifications available www.kbico.com

2" GRAY PVC BALL VALVE IPS

LDR 024 BV-2 2-Inch PVC Ball Valve

LDR 024 BV-2 2-Inch PVC Ball Valve Review

LDR 024 BV-2 2-Inch PVC Ball Valve Feature

• 2-Inch PVC Schedule 40
• Impact resistant
• High insulated value
• Non-corrosive
• Use for cold water irrigation and sprinkler systems

Ldr FP4 BV-2 PVC Ball Valves Non-Threaded, Ldr FP4 BV-2 PVC Ball Valves Non-Threaded, Features:; PVC construction; 150 PSI rated at 72 º F; Solid Teflon seals; Large flow opening; Quarter turn operation; Solvent ends comply with ASTM D2-466; Slip x Slip; FP4 BV-12: 1/2"; FP4 BV-34: 3/4"; FP4 BV-1: 1"; * Image shown may vary by color, finish, or material

Apollo 77-140 Series Bronze Ball Valve with Stainless Steel 316 Ball and Stem, with Mounting Pad, Two Piece, Inline, Lever, 2" NPT Female

Apollo 77-140 Series Bronze Ball Valve with Stainless Steel 316 Ball and Stem, with Mounting Pad, Two Piece, Inline, Lever, 2" NPT Female Review

Apollo 77-140 Series Bronze Ball Valve with Stainless Steel 316 Ball and Stem, with Mounting Pad, Two Piece, Inline, Lever, 2" NPT Female Feature

• Made of bronze for higher strength and corrosion resistance than brass
• Zinc-plated steel lever handle with vinyl sleeve for manual on/off control
• Actuator mounting pad for automated operation
• Stainless steel 316 ball and stem for resistance to corrosion
• Female National Pipe Taper (NPT) threads for connecting to male threaded pipes

The Apollo 77-140 series bronze two-piece inline ball valve has a lever handle, an actuator mounting pad, and female National Pipe Taper (NPT) threads on both ends. The body of this valve is made of bronze for higher strength and corrosion resistance than brass, and the ball and stem are made of stainless steel 316 for greater corrosion resistance than standard steel. It has a zinc-plated steel lever handle with a vinyl sleeve for manual on/off control. This valve has a mounting pad for attaching a quarter-turn electric or pneumatic actuator to provide automated operation, and it has NPT threads for creating tighter seals than straight threads. Reinforced polytetrafluoroethylene (RPTFE) seats and multifill polytetrafluoroethylene (MPTFE) stem packing reduce the possibility of leakage. The valve is full port for reduced friction; its inner diameter is the same as the inner diameter of the pipe it connects to for maximum operating efficiency. The maximum pressure is 600 pounds per square inch (gauge) (psig) for use with water, oil, and gas (WOG) and 150 psig for saturated steam, and the temperature range is -20 to 450 degrees Fahrenheit. This ball valve is for use in water lines, processing plants, and agricultural applications and meets standard MSS SP-110 for quality assurance.

Ball valves use a spherical disc to control the flow between pipes, tubes, or hoses. Flow is allowed when the hole that pierces the ball-shaped disc is in line with the inlet and outlet of the valve. Flow is blocked when the ball is horizontally swiveled 90 degrees, so that the hole of the ball is perpendicular to the opening of the valve. Ball valves can be referred to as full port or reduced port (also known as regular or standard port) depending on the inner diameter of the valve. A ball valve is full port if the hole of the ball is the same size as the inner diameter of the connecting pipeline (resulting in lower friction) and is reduced port if the hole of the valve is one pipe size smaller than the pipe, resulting in less flow through the valve than through the shaft of the pipe. Ball valves may have a handle or lever that aligns with the ball’s position (open or closed) for manual operation. They are primarily used in air, gas, liquid, and steam applications.

Apollo manufactures ball, mixing, and relief valves, actuators, water gauges, marine fittings, heating and plumbing products, and backflow prevention devices. The company, founded in 1928 and headquartered in Matthews, NC, meets International Organization for Standardization ISO/IEC 17025:2005 and makes products that meet ISO and American National Standards Institute (ANSI) standards.

Thetford 09868 Aqua Magic Galaxy/Starlite Ball Valve Package

Thetford 09868 Aqua Magic Galaxy/Starlite Ball Valve Package Review

Thetford 09868 Aqua Magic Galaxy/Starlite Ball Valve Package Feature

• PART # 37821
• RV TOILET REPLACEMENT PARTS

Ball Valve Package will replace ball valve in aqua magic models, SL Starlite, SH Starlite, GL Galaxy, GH Galaxy, CL Constellation, and CH Constellation. Not for replacement of ball valve in Aqua Magic III model AM III.

LDR 022 2237 1-1/2-Inch FIP Ball Valve, Lead Free Brass

LDR 022 2237 1-1/2-Inch FIP Ball Valve, Lead Free Brass Review

LDR 022 2237 1-1/2-Inch FIP Ball Valve, Lead Free Brass Feature

• 1-1/2-Inch FIP Lead Free Brass
• Hard chrome plated ball
• Meets NSF61 standards
• Lead free brass AB1953 certified
• ANSI B2.1 for pipe threads and ANSI B2.4 hose threads

022-2237 Features: -Ball valve.-Full port.-Vinyl grip.-Quarter turn operation.-Low lead.-PTFE seals.-Water flow rate: 150 PSI. Construction: -Handle construction: Heavy stamped steel.-Forged brass construction. Color/Finish: -Chrome finish.

Premium 1/4" Air Ball Valve - Solid Brass Male/Female

Premium 1/4" Air Ball Valve - Solid Brass Male/Female Review

Premium 1/4" Air Ball Valve - Solid Brass Male/Female Feature

• Premium-quality air tool & air supply accessory
• Large galvanized steel handle for easy on/off, non-slip PVC-dipped soft grip
• 180-degree rotation for left- or right-handed installation
• Precision-machined polished stainless steel ball for exceptionally smooth operation silicone seal
• One end male threaded, other female; 1/4" NPT; excellent quality, made in Taiwan

Apollo 70-300 Series Bronze Ball Valve, Two Piece, Inline, Lever, 3/4" NPT Female X Union NPT Female

Apollo 70-300 Series Bronze Ball Valve, Two Piece, Inline, Lever, 3/4" NPT Female X Union NPT Female Review

Apollo 70-300 Series Bronze Ball Valve, Two Piece, Inline, Lever, 3/4" NPT Female X Union NPT Female Feature

• Fluorocarbon O ring sealed single union requires only light torque to seal
• Reinforced seats
• Single union end bronze ball valve
• Blow out proof stem design
• Adjustable packing gland

70-300 Series Single Union End Bronze Ball Valve. Threaded, Single Union End, 600 psig WOG, Cold Non-Shock. 150 psig Saturated Steam, Vacuum Service to 29 inches Hg. Federal Specification: WW-V-35C, Type: II, Composition: BZ, Style: 3. MSS SP-110. Made in USA.

Yellow Jacket 93842 45° Compact Ball Valve 1/4" (3 pak)

Yellow Jacket 93842 45° Compact Ball Valve 1/4" (3 pak) Review

Yellow Jacket 93842 45° Compact Ball Valve 1/4" (3 pak) Feature

• Set of 45 degree compact ball valves
• Full flow feature
• Has a metal valve handle
• Leading HVAC/R and automotive air conditioning professionals

Set of 3- 45degreeCompact Ball Valves for full flow (1/4")

Now a smaller ball valve more compact - still features full flow. Metal valve handle, add to hoses for charging and recovery.

• UL recognized assembly to 4000 psi (276 bar) min. burst, 800 psi (55 bar) max. working pressure.

Apollo 75-100 Series Bronze Ball Valve, Two Piece, Inline, Lockable Lever, 3/4" NPT Female

Apollo 75-100 Series Bronze Ball Valve, Two Piece, Inline, Lockable Lever, 3/4" NPT Female Review

Apollo 75-100 Series Bronze Ball Valve, Two Piece, Inline, Lockable Lever, 3/4" NPT Female Feature

• Made of bronze for higher strength and corrosion resistance than brass
• Lockable lever handle can be locked into position using a portable lock
• Pounds per square inch (gauge) (psig) rating of 600 for water, oil, and gas (WOG) and 150 for saturated steam
• Female National Pipe Taper (NPT) threads on both ends for use with male threaded connections
• Reinforced polytetrafluoroethylene (RPTFE) seats and PTFE seal reduce the risk of valve leakage

The Apollo 75-100 series two-piece inline ball valve is made of bronze and has a lockable lever-handle and female National Pipe Taper (NPT) threaded connections on both ends. This valve is made of bronze for higher strength and corrosion resistance than brass. This valve has a zinc-plated steel, lockable lever handle that can be locked in the open or closed position using a portable lock (not included). The maximum pressure is 600 pounds per square inch (gauge) (psig) for use with water, oil, and gas (WOG) and 150 for saturated steam. The valve is inline for connecting two pipes going in the same direction and has NPT threads on both ends for creating tighter seals than straight threads. Reinforced polytetrafluoroethylene (RPTFE) seats and a PTFE seal reduce the risk of valve leakage. This ball valve is standard (or regular) port for reduced valve size and cost and has a working temperature range of -20 to 450 degrees Fahrenheit. This valve is for use in water lines, processing plants, and agricultural applications and meets standard MSS SP-110 for quality assurance.

Ball valves use a spherical disc to control the flow between pipes, tubes, or hoses. Flow is allowed when the hole that pierces the ball-shaped disc is in line with the inlet and outlet of the valve. Flow is blocked when the ball is horizontally swiveled 90 degrees, so that the hole of the ball is perpendicular to the opening of the valve. Ball valves can be referred to as full port or reduced port (also known as regular or standard port) depending on the inner diameter of the valve. A ball valve is full port if the hole of the ball is the same size as the inner diameter of the connecting pipeline (resulting in lower friction) and is reduced port if the hole of the valve is one pipe size smaller than the pipe, resulting in less flow through the valve than through the shaft of the pipe. Ball valves may have a handle or lever that aligns with the ball’s position (open or closed) for manual operation. They are primarily used in air, gas, liquid, and steam applications.

Apollo manufactures ball, mixing, and relief valves, actuators, water gauges, marine fittings, heating and plumbing products, and backflow prevention devices. The company, founded in 1928 and headquartered in Matthews, NC, meets International Organization for Standardization ISO/IEC 17025:2005 and makes products that meet ISO and American National Standards Institute (ANSI) standards.

King Brothers Inc. LT-1000-T 1-Inch Threaded PVC Schedule 80 Commercial Ball Valve, Gray

King Brothers Inc. LT-1000-T 1-Inch Threaded PVC Schedule 80 Commercial Ball Valve, Gray Review

King Brothers Inc. LT-1000-T 1-Inch Threaded PVC Schedule 80 Commercial Ball Valve, Gray Feature

• Made in the USA with quality PolyOne Schedule 80 PVC II material
• NSF certified to be drinking water safe and low lead approved
• UPC/IAPMO listed
• Pressure rated to 150 psi at 73F Degree
• Details and certifications available www.kbico.com

1" LO-TORQ BALL VALVE THD