Watts PEX LFP-560 In-Line Full Port Ball Valve 1/2-Inch Barb x 1/2-Inch Barb Low-Lead, Brass

Watts PEX LFP-560 In-Line Full Port Ball Valve 1/2-Inch Barb x 1/2-Inch Barb Low-Lead, Brass Review

Watts PEX LFP-560 In-Line Full Port Ball Valve 1/2-Inch Barb x 1/2-Inch Barb Low-Lead, Brass Feature

• Low Lead 1/2-Inch Barb X Barb Brass Pex Ball Valve
• No soldering, no threading, and no waiting
• Solid, leak-proof connection completed in a matter of seconds
• Listed by the NSF International to NSF Standards 14 and 61 for use in potable water systems
• Low lead brass is not more than a weighted average of 0.25% lead when used with respect to the wetted surfaces of pipes and pipe and plumbing fittings and fixtures

2 piece, full port, brass ball valve with PEX ends are designed for use in PEX piping systems. They feature brass PEX end tailpieces, designed for easy crimping into a PEX piping system. The series LFWPBV features lead free construction to comply with lead free installation requirements. Features: 2 piece, full port design; forged lead free brass body; PEX end designed to ASTM F 1807; valve rated to 400 water or gas; crimp connection rated to 160 P.S.I. at 73 F. 23 C. Approved valve to be 2 piece, full port, forged brass body, chrome plated brass ball, virgin PTFE seats and stem packing, and Viton stem O ring. Ball valve rated to water or gas and PEX end must comply with ASTM F 1807 standard. Crimp joint rated at 160 P.S.I. at 73 F. 23 C. The valve shall be constructed using lead free brass. Lead free brass ball valves shall comply with state codes and standards, where applicable, requiring reduced lead content. Manufactured to include no more than 0.25% weighted average lead content on wetted surfaces.
No. LF P 560: 1 2'' barb x 1 2'' barb (5 8'' O.D. PEX tubing)
No. LF P 760: 3 4'' barb x 3 4'' barb (7 8'' O.D. PEX tubing)
No. LF P 1160: 1'' barb x 1'' barb (1 1 8'' O.D. PEX tubing)